Influence of Tangential Displacement on the Adhesion Force between Gradient Materials
DOI:
https://doi.org/10.15407/ujpe65.3.205Keywords:
adhesion, tribology, numerical simulation, method of dimensionality reductionAbstract
The influence of a tangential displacement on the strength of the adhesive contacts between gradient materials with different gradings of their properties has been studied. Variants with a controlled force (fixed load) and a controlled displacement (fixed grips) are considered. A relationship between the normal and tangential critical force components at which the contact is destroyed is obtained. It is valid within the whole interval of the gradient parameters, where the detachment criterium is obeyed. The optimal parameters at which the adhesive contact strength is maximum are determined. A case of detachment under the action of only the tangential force, i.e. when the normal force equals zero, is analyzed separately.
References
Functionally Graded Materials: Design, Processing and Applications. Edited by Y. Miyamoto, W.A. Kaysser, B.H. Rabin, A. Kawasaki, R.G. Ford (Springer, 1999) [ISBN: 978-1-4615-5301-4].
A. Gupta, T. Mohammad. Recent development in modeling and analysis of functionally graded materials and structures. Prog. Aerosp. Sci. 79, 1 (2015). https://doi.org/10.1016/j.paerosci.2015.07.001
I. Argatov, A. Iantchenko. Rayleigh surface waves in functionally graded materials - long-wave limit. Q. J. Mech. Appl. Math. 72, 197 (2019). https://doi.org/10.1093/qjmam/hbz002
F. Jin, X. Guo, W. Zhang. A unified treatment of axisymmetric adhesive contact on a powerlaw graded elastic half-space. J. Appl. Mech. 80, 061024 (2013). https://doi.org/10.1115/1.4023980
J. Aboudi, M.-J. Pindera, S.M. Arnold. Higher-order theory for functionally graded materials. Compos. Part B Eng. 30, 777 (1999). https://doi.org/10.1016/S1359-8368(99)00053-0
M. Hill, R. Carpenter, G. Paulino, Z. Munir, J. Gibeling. Fracture testing of a layered functionally graded material. In Fracture Resistance Testing of Monolithic and Composite Brittle Materials, edited by J. Salem, G. Quinn, M. Jenkins (ASTM International, 2002), p. 169. https://doi.org/10.1520/STP10478S
C.-E. Rousseau, V.B. Chalivendra, H.V. Tippur, A. Shukla. Experimental fracture mechanics of functionally graded materials: An overview of optical investigations. Exp. Mech. 7, 845 (2010). https://doi.org/10.1007/s11340-010-9381-z
V.L. Popov, R. Pohrt, Q. Li. Strength of adhesive contacts: Influence of contact geometry and material gradients. Friction 5, 308 (2017). https://doi.org/10.1007/s40544-017-0177-3
E. Martinez-Paneda, R. Gallego. Numerical analysis of quasi-static fracture in functionally graded materials. Int. J. Mech. Mater. Des. 11, 405 (2015). https://doi.org/10.1007/s10999-014-9265-y
Q. Li, V.L. Popov. Boundary element method for normal non-adhesive and adhesive contacts of power-law graded elastic materials. Comp. Mech. 61, 319 (2017). https://doi.org/10.1007/s00466-017-1461-9
Q. Li, R. Pohrt, I.A. Lyashenko, V.L. Popov. Boundary element method for nonadhesive and adhesive contacts of a coated elastic half-space. Proc. Inst. Mech. Eng. J. 234, 73 (2019). https://doi.org/10.1177/1350650119854250
V.L. Popov, M. Hess. Method of dimensionality reduction in contact mechanics and friction: a user's handbook. I. Axially-symmetric contacts. FU Mech. Eng. 12, 1 (2014).
M. Hess, V.L. Popov. Method of dimensionality reduction in contact mechanics and friction: a user's handbook. II. Power-law graded materials. FU Mech. Eng. 14, 251 (2016). https://doi.org/10.22190/FUME1603251H
M. Hess. A simple method for solving adhesive and non-adhesive axisymmetric contact problems of elastically graded materials. Int. J. Eng. Sci. 104, 20 (2014). https://doi.org/10.1016/j.ijengsci.2016.04.009
E. Willert, A.I. Dmitriev, S.G. Psakhie, V.L. Popov. Effect of elastic grading on fretting wear. Sci. Rep. 9, 7791 (2019). https://doi.org/10.1038/s41598-019-44269-1
I. Argatov. From Winkler's foundation to Popov's foundation. FU Mech. Eng. 17, 181 (2019). https://doi.org/10.22190/FUME190330024A
V.L. Popov, I.A. Lyashenko, A.E. Filippov. Influence of tangential displacement on the adhesion strength of a contact between a parabolic profile and an elastic half-space. Roy. Soc. Open Sci. 4, 161010 (2017). https://doi.org/10.1098/rsos.161010
K.L. Johnson, K. Kendall, A.D. Roberts. Surface energy and the contact of elastic solids. Proc. R. Soc. Lond. A 324, 301 (1971). https://doi.org/10.1098/rspa.1971.0141
I.A. Lyashenko, E. Willert, V.L. Popov. Adhesive impact of an elastic sphere with an elastic half space: Numerical analysis based on the method of dimensionality reduction. Mech. Mat. 92, 155 (2016). https://doi.org/10.1016/j.mechmat.2015.09.009
K.L. Johnson. Adhesion and friction between a smooth elastic spherical asperity and a plane surface. Proc. R. Soc. Lond. A 453, 163 (1997). https://doi.org/10.1098/rspa.1997.0010
I.A. Lyashenko. Tangential displacement influence on the critical normal force of adhesive contact breakage in biological systems. FU Mech. Eng. 14, 313 (2016). https://doi.org/10.22190/FUME1603313L
J.W. Hutchinson, Z. Suo. Mixed mode cracking in layered materials. Adv. Appl. Mech. 29, 63 (1991). https://doi.org/10.1016/S0065-2156(08)70164-9
E. Willert. Dugdale-Maugis adhesive normal contact of axisymmetric power-law graded elastic bodies. FU Mech. Eng. 16, 9 (2018). https://doi.org/10.22190/FUME171121003W
W. Deng, H. Kesari. Depth-dependent hysteresis in adhesive elastic contacts at large surface roughness. Sci. Rep. 9, 1639 (2019). https://doi.org/10.1038/s41598-018-38212-z
B.N.J. Persson. Adhesion between an elastic body and a randomly rough hard surface. Eur. Phys. J. E 8, 385 (2002). https://doi.org/10.1140/epje/i2002-10025-1
Z. Liu, H. Lu, Y. Zheng, D. Tao, Y. Meng, Y. Tian. Transient adhesion in a non-fully detached contact. Sci. Rep. 8, 6147 (2018). https://doi.org/10.1038/s41598-018-24587-6
M. Scaraggi, D. Comingio. Rough contact mechanics for viscoelastic graded materials: The role of small-scale wave-lengths on rubber friction. Int. J. Solids Struct. 125, 276 (2017). https://doi.org/10.1016/j.ijsolstr.2017.06.008
L.D. Landau, E.M. Lifshitz. Theory of Elasticity (Pergamon Press, 1970) [ISBN: 9780080064659].
D.L. Holl. Stress transmission in earths. Highway Res. Board Proc. 20, 709 (1940).
F.M. Borodich, B.A. Galanov, Y.I. Prostov, M.M. Suarez-Alvarez. Influence of complete sticking on the indentation of a rigid cone into an elastic half space in the presence of molecular adhesion. J. Appl. Math. Mech. 76, 590 (2012). https://doi.org/10.1016/j.jappmathmech.2012.11.006
V.L. Popov, A.V. Dimaki. Friction in an adhesive tangential contact in the Coulomb-Dugdale approximation. J. Adhes. 93, 1131 (2017). https://doi.org/10.1080/00218464.2016.1214912
Downloads
Published
How to Cite
Issue
Section
License
Copyright Agreement
License to Publish the Paper
Kyiv, Ukraine
The corresponding author and the co-authors (hereon referred to as the Author(s)) of the paper being submitted to the Ukrainian Journal of Physics (hereon referred to as the Paper) from one side and the Bogolyubov Institute for Theoretical Physics, National Academy of Sciences of Ukraine, represented by its Director (hereon referred to as the Publisher) from the other side have come to the following Agreement:
1. Subject of the Agreement.
The Author(s) grant(s) the Publisher the free non-exclusive right to use the Paper (of scientific, technical, or any other content) according to the terms and conditions defined by this Agreement.
2. The ways of using the Paper.
2.1. The Author(s) grant(s) the Publisher the right to use the Paper as follows.
2.1.1. To publish the Paper in the Ukrainian Journal of Physics (hereon referred to as the Journal) in original language and translated into English (the copy of the Paper approved by the Author(s) and the Publisher and accepted for publication is a constitutive part of this License Agreement).
2.1.2. To edit, adapt, and correct the Paper by approval of the Author(s).
2.1.3. To translate the Paper in the case when the Paper is written in a language different from that adopted in the Journal.
2.2. If the Author(s) has(ve) an intent to use the Paper in any other way, e.g., to publish the translated version of the Paper (except for the case defined by Section 2.1.3 of this Agreement), to post the full Paper or any its part on the web, to publish the Paper in any other editions, to include the Paper or any its part in other collections, anthologies, encyclopaedias, etc., the Author(s) should get a written permission from the Publisher.
3. License territory.
The Author(s) grant(s) the Publisher the right to use the Paper as regulated by sections 2.1.1–2.1.3 of this Agreement on the territory of Ukraine and to distribute the Paper as indispensable part of the Journal on the territory of Ukraine and other countries by means of subscription, sales, and free transfer to a third party.
4. Duration.
4.1. This Agreement is valid starting from the date of signature and acts for the entire period of the existence of the Journal.
5. Loyalty.
5.1. The Author(s) warrant(s) the Publisher that:
– he/she is the true author (co-author) of the Paper;
– copyright on the Paper was not transferred to any other party;
– the Paper has never been published before and will not be published in any other media before it is published by the Publisher (see also section 2.2);
– the Author(s) do(es) not violate any intellectual property right of other parties. If the Paper includes some materials of other parties, except for citations whose length is regulated by the scientific, informational, or critical character of the Paper, the use of such materials is in compliance with the regulations of the international law and the law of Ukraine.
6. Requisites and signatures of the Parties.
Publisher: Bogolyubov Institute for Theoretical Physics, National Academy of Sciences of Ukraine.
Address: Ukraine, Kyiv, Metrolohichna Str. 14-b.
Author: Electronic signature on behalf and with endorsement of all co-authors.
.png){kind=small}
