Helically Wound Superconducting Cable Production System
DOI:
https://doi.org/10.15407/ujpe71.2.87Keywords:
helical winding, helically wound superconducting cables, high power cables, precision manufacturing, superconducting cablesAbstract
This study presents an advanced production system for helically wound superconducting cables. The developed system addresses critical challenges in high-current applications (such as power transmission, fusion reactors, and space technologies) by combining modular design with precision engineering solutions. It is directly applicable to the production of superconducting magnets required for particle accelerators and high-energy detector systems. Key innovations of the system include an adjustable tension control mechanism (with a range of 10–20 Nm), multi-axis synchronization (seven-axis motion control), and configurable winding parameters (helix angle between 10∘ and 75∘, diameter range of 6–25 mm). The production platform integrates up to 16 independent tensioning units and provides precision tension management via an adaptive control mechanism. The output of the device confirms the system’s ability to produce industrial-quality superconducting cables while minimizing mechanical deformation. These technological advancements provide a strong foundation for integration into large-scale infrastructure projects in high-energy physics.
References
1. M. Tinkham. Introduction to Superconductivity (Dover Publications, 2004).
2. C. Kittel, P. McEuen. Introduction to Solid State Physic (John Wiley & Sons, 2018).
3. B.G. Marchionini, Y. Yamada, L. Martini, H. Ohsaki. High-temperature superconductivity: A roadmap for electric power sector applications, 2015-2030. IEEE Trans. Appl. Supercond. 27 (4), 1 (2017).
https://doi.org/10.1109/TASC.2017.2671680
4. IMARC Group. Cable Management Market - Industry Trends. Size 2033 (Industry Report, 2024).
5. Market Research Future. Superconducting Wire Market Size, Growth Report, 2035 (Industry Report, 2024).
6. CIGRE Working Group B1.31. Recommendations for testing of superconducting cables. Technical Brochure 538 (2013).
7. W. Lee, D. Park, J. Bascu˜n'an, Y. Iwasa. Construction and test result of an all-REBCO conduction-cooled 23.5 T magnet prototype towards a benchtop 1 GHz NMR spectroscopy. Supercond. Sci. Technol. 35 (10), 105007 (2022).
https://doi.org/10.1088/1361-6668/ac8773
8. E. Moser, E. Laistler, F. Schmitt, G. Kontaxis. Ultra-high field NMR and MRI-the role of magnet technology to increase sensitivity and specificity. Front. Phys. 5, 33 (2017).
https://doi.org/10.3389/fphy.2017.00033
9. K. Sawada. Outlook of the superconducting maglev. Proc. IEEE 97 (11), 1881 (2009).
https://doi.org/10.1109/JPROC.2009.2030246
10. D. Uglietti. A review of commercial high temperature superconducting materials for large magnets: From wires and tapes to cables and conductors. Supercond. Sci. Technol. 32 (5), 053001 (2019).
https://doi.org/10.1088/1361-6668/ab06a2
11. D.C. van der Laan, P.N. Barnes. Development of CORC® cables for high-field magnet and power transmission applications. Supercond. Sci. Technol. 24 (4), 042001 (2011).
https://doi.org/10.1088/0953-2048/24/4/042001
12. X. Wang, S. Caspi, D.R. Dietderich et al. A viable dipole magnet concept with REBCO CORC® wires and further development needs for high-field magnet applications. Supercond. Sci. Technol. 31 (4), 045007 (2018).
https://doi.org/10.1088/1361-6668/aaad8f
13. D.C. Van der Laan, J.D. Weiss, D.M. McRae. Status of CORC® cables and wires for use in high-field magnets and power systems a decade after their introduction. Supercond. Sci. Technol. 32 (3), 033001 (2019).
https://doi.org/10.1088/1361-6668/aafc82
14. S. Tang, H. Yong, Y. Zhou. Mechanical behavior of HTS tape in highly flexible REBCO cable under tensile and torsional loads. arXiv preprint arXiv:2408.10617 (2024).
https://doi.org/10.1088/1361-6668/ada832
15. J.S. Lu, M.Y. Cheng, K.H. Su, M.C. Tsai. Wire tension control of an automatic motor winding machine - An iterative learning sliding mode control approach. Robot. Comput.-Integr. Manuf. 50, 50 (2018).
https://doi.org/10.1016/j.rcim.2017.09.003
16. S. Fang, D. Franitza, M. Torlo et al. Motion control of a tendon-based parallel manipulator using optimal tension distribution. IEEE/ASME Trans. Mechatron. 9 (3), 561 (2004).
https://doi.org/10.1109/TMECH.2004.835336
17. X.M. Xu, W.X. Zhang, X.L. Ding, M. Zhang, S.H. Wei. Design and analysis of a novel tension control method for winding machine. Chinese J. Mech. Eng. 31 (1), 101 (2018).
https://doi.org/10.1186/s10033-018-0304-8
18. X. Xu, X. Song, Z. Qi. ATKB-PID: An adaptive control method for micro tension under complex hot rolling conditions. Sci. Rep. 15 (1), 2050 (2025).
https://doi.org/10.1038/s41598-025-85960-w
19. F. He, S. Wang, C. Wang. Inhibition of tension vibration for winding tension control system. In: Proc. 2018 37th Chinese Control Conference (CCC) (2018), p. 3725.
https://doi.org/10.23919/ChiCC.2018.8482580
20. L. Deng, H. Suo, H. Ren. Design of insulation tape tension control system of transformer winding machine based on fuzzy PID. Sensors 21 (19), 6512 (2021).
https://doi.org/10.3390/s21196512
21. F. Meng, S. Liu, K. Liu. Design of an optimal fractional order PID for constant tension control system. IEEE Access 8, 58933 (2020).
https://doi.org/10.1109/ACCESS.2020.2983059
22. Espressif Systems, ESP32 Series Datasheet - Dual-core MCU with Wi-Fi & Bluetooth. Technical Specification v3.8 (2025).
23. P. Boonmeeruk, P. Palrat, K. Wongsopanakul. Costeffective IIoT gateway development using ESP32 for industrial applications. Eng. J. 28 (10), 93 (2024).
https://doi.org/10.4186/ej.2024.28.10.93
24. Y. Karan, S. Kahveci. Wireless measurement of thermocouple with microcontroller. In: Proc. 2015 23nd Signal Processing and Communications Applications Conference (SIU) (2015), p. 120.
https://doi.org/10.1109/SIU.2015.7129867
25. P. Folt'ynek, M. Babiuch, P. ˇSur'anek. Measurement and data processing from Internet of Things modules by dualcore application using ESP32 board. Meas. Control 52 (7-8), 970 (2019).
https://doi.org/10.1177/0020294019857748
26. Y. Karan, E. Yıldız, S. Dizman, S. Tok¸calar. Zırhlı ¨ol¸c¨um odasına sahip radyasyon dedekt¨orleri i¸sin uzaktan kontroll¨u numune de˘gi¸stiricisinin tasarlanması ve geli¸stirilmesi. Karadeniz Fen Bilimleri Dergisi 13 (4), 1824 (2023).
https://doi.org/10.31466/kfbd.1356337
27. L. Tu, M. Guo, J. Wang, W. Gao. Warp yarn tension coupling models and fuzzy PID control for enhancing warp beam unwinding tension stability in sizing machines. J. Indust. Text. 54, 15280837241301709 (2024).
Downloads
Published
Issue
Section
License
Copyright Agreement
License to Publish the Paper
Kyiv, Ukraine
The corresponding author and the co-authors (hereon referred to as the Author(s)) of the paper being submitted to the Ukrainian Journal of Physics (hereon referred to as the Paper) from one side and the Bogolyubov Institute for Theoretical Physics, National Academy of Sciences of Ukraine, represented by its Director (hereon referred to as the Publisher) from the other side have come to the following Agreement:
1. Subject of the Agreement.
The Author(s) grant(s) the Publisher the free non-exclusive right to use the Paper (of scientific, technical, or any other content) according to the terms and conditions defined by this Agreement.
2. The ways of using the Paper.
2.1. The Author(s) grant(s) the Publisher the right to use the Paper as follows.
2.1.1. To publish the Paper in the Ukrainian Journal of Physics (hereon referred to as the Journal) in original language and translated into English (the copy of the Paper approved by the Author(s) and the Publisher and accepted for publication is a constitutive part of this License Agreement).
2.1.2. To edit, adapt, and correct the Paper by approval of the Author(s).
2.1.3. To translate the Paper in the case when the Paper is written in a language different from that adopted in the Journal.
2.2. If the Author(s) has(ve) an intent to use the Paper in any other way, e.g., to publish the translated version of the Paper (except for the case defined by Section 2.1.3 of this Agreement), to post the full Paper or any its part on the web, to publish the Paper in any other editions, to include the Paper or any its part in other collections, anthologies, encyclopaedias, etc., the Author(s) should get a written permission from the Publisher.
3. License territory.
The Author(s) grant(s) the Publisher the right to use the Paper as regulated by sections 2.1.1–2.1.3 of this Agreement on the territory of Ukraine and to distribute the Paper as indispensable part of the Journal on the territory of Ukraine and other countries by means of subscription, sales, and free transfer to a third party.
4. Duration.
4.1. This Agreement is valid starting from the date of signature and acts for the entire period of the existence of the Journal.
5. Loyalty.
5.1. The Author(s) warrant(s) the Publisher that:
– he/she is the true author (co-author) of the Paper;
– copyright on the Paper was not transferred to any other party;
– the Paper has never been published before and will not be published in any other media before it is published by the Publisher (see also section 2.2);
– the Author(s) do(es) not violate any intellectual property right of other parties. If the Paper includes some materials of other parties, except for citations whose length is regulated by the scientific, informational, or critical character of the Paper, the use of such materials is in compliance with the regulations of the international law and the law of Ukraine.
6. Requisites and signatures of the Parties.
Publisher: Bogolyubov Institute for Theoretical Physics, National Academy of Sciences of Ukraine.
Address: Ukraine, Kyiv, Metrolohichna Str. 14-b.
Author: Electronic signature on behalf and with endorsement of all co-authors.
.png){kind=small}
